The GFT1004 is a multi-channel digital delay generator that functions either as a standalone or as a component in a timing system. As a standalone instrument, it will produce multiple channels of delays which can be triggered by an external trigger or by selectable internal triggers. As a component of a timing system, the GFT1004 (with option 1) is operated in conjunction with a GFT3001 master...
Greenfield Technology's GFT3001 Master Oscillator Transmitter delivers a serial datastream over an optical network to manage the synchronizer triggering and time base. The GFT3001 provides up to 2048 triggers to equipment distributed over networks and important areas encountered in large laser timing systems.
Greenfield Technology's GFT4218, cPCI High Voltage Pulse Generator module provides eight simultaneous high voltage pulses. Channel to channel jitter is less than 25ps. LEMO outputs deliver 100V into 50 Ω. One T0 sync output (zero delay) is used to reference the eight output channels. One input channel triggers all or any output channels.
Greenfield Technology's GFT 7002 is a fast, leading edge, long flat Topline step generator. This generator is well suited for characterizing the step responses of long coaxial cable. An output trigger allows the user to trigger the digital scope for recording cable response.Settings are controlled via front panel or Ethernet network. A powerful control panel web page from an embedded server,...
Greenfield Technology's GFT4208 Digital Splitter cPCI module provides eight simultaneous pulses. Channel to channel jitter is less than 25 ps. LEMO outputs deliver 3V level under 50 Ω. One Trig in or push button is used to trigger off all output channels. One Trig out is used to split Trig in.
Greenfield Technology's FTD10000 Ultrafast 7 GHz Fast Transient Digitizer is the industry's fastest digitizer specifically designed to record very fast single shot pulses down to 50ps with 13-bit amplitude resolution. The FTD10000 is the ideal instrument for recording impulse phenomena in laser research, high-energy physics, EMC/EMP simulators and high-voltage breakdowns, as well as testing...
The GFT2002 is very precise time interval analyzer with world leading low jitter. It has two inputs, a Start and a Stop input, which are used to measure the time interval.
Data output represents the time interval between one start and one stop. Trigger level and slope are adjustable on each input. The module uses a linear interpolation technique and an internal calibration to obtain...
The GFT214 rack converts one optical input pulse to four (4) fast electrical pulse of 10 V under 50 Ω.
This rack combines with GFT101 (Electrical to optical converter) is ideal for transmitting a pulse to remote locations up to 1 Km away, and when the critical pulse has high common mode voltage with respect to the measurement equipment.
The GFT204 module converts one optical pulse to four (4) fast electrical pulse of 10 V under 50 Ω. This compact module combines with GFT101 (Electrical to optical converter) is ideal for transmitting pulses to remote location up to 1 Km and when the critical pulse has high common mode voltage with respect to the measurement equipment.
